Article by Casey Impagliazzo | January 19, 2018
Students and staff collaborate on sanction protocol
Article by College of Arts and Sciences Communications Staff | January 19, 2018
Collaborative projects focus on equity, inclusion in education
Article by UDaily staff | January 19, 2018
Georgetown professor to talk about teaching, research and activism today
Video by Leah Dodd March 03, 2017
New approach to improving materials for interfacing neural tissue with electronic biomedical devices reported
Modern electronic biomedical devices are enabling a wide range of sophisticated health interventions, from seizure detection and Parkinson’s disease therapy to functional artificial limbs, cochlear implants and smart contact lenses.
An effective direct interfacing material is essential to communication between these devices and neural tissue, which includes nerves and the brain.
In recent years, a conjugated polymer known as PEDOT — widely used in applications such as energy conversion and storage, organic light-emitting diodes, electrochemical transistors, and sensing — has been investigated for its potential to serve as this interface.
In some cases, however, the low mechanical stability and relatively limited adhesion of conjugated polymers like PEDOT — short for poly (3,4-ethylene dioxythiophene) — on solid substrates can limit the lifetime and performance of these devices. Mechanical failure might also leave behind undesirable residue in the tissue.
Now, a research team led by the University of Delaware’s David Martin has reported the development of an electrografting approach to significantly enhance PEDOT adhesion on solid substrates. The breakthrough is documented in a paper published in Science Advances on March 3.
Martin, the Karl W. and Renate Böer Professor of Materials Science and Engineering, explains that the term electrografting describes a process in which organic molecules are electrochemically oxidized or reduced, followed by the formation of metal-organic bonds at the substrate-polymer interface.
Compared to other methods, surface modification through electro-grafting takes just minutes. Another advantage is that a variety of materials can be used as the conducting substrate, including gold, platinum, glassy carbon, stainless steel, nickel, silicon and metal oxides.
The actual chemistry usually takes multiple steps, but Martin and his team have developed a simple, two-step approach for creating PEDOT films that strongly bond with metal and metal oxide substrates, yet remain electrically active.
“Our results suggest that this is an effective means to selectively modify microelectrodes with highly adherent and highly conductive polymer coatings as direct neural interfaces,” Martin says.
About the research
The research was supported in part by the National Institutes of Health through EUREKA grant 1RO1EB010892, by the Defense Advanced Research Projects Agency through grant N66001-11-C-4190, by the National Science Foundation through grants DMR-1103027 and DMR-1505144, and by the University of Delaware.
The paper, “Enhanced PEDOT Adhesion on Solid Substrates with Electrografted P(EDOT-NH2),” was co-authored by Liangqi Ouyang (UD Department of Materials Science and Engineering [UD-MSE]), Bin Wei (UD-MSE), Chin-chen Kuo (UD-MSE), Sheevangi Pathak (Department of Materials Science and Engineering, Penn State University), Brendan Farrell (UD Department of Biomedical Engineering), and David C. Martin (UD-MSE).
Article by Adam Thomas | January 18, 2018
UD study looks at how light pollution lures birds into urban areas during fall migration
Article by Carlett Spike | January 18, 2018
UD faculty explain research, the importance of volunteers
Article by Dante LaPenta | January 19, 2018
The College of Health Sciences Pipeline Program engages local high school students to inspire future healthcare workforce